STATIC GROUNDING SET

This static grounding set is designed to reliably remove static loads on de-energized systems such as: connection terminals and conductors on transformers or generators.

To operate this tool, first connect the grounding clamp to a safe ground point.

Then, using the copper hook, install the stick at the point where the static charge must be discharged from the system.

When maintenance is complete, use the same sequential procedure adopted in the installation, but in the opposite order. That is: first remove the ground stick from the work point and then disconnect the grounding clamp.

| RT600-0891
Ø 32 mm x 1,07 m RITZGLAS® stick composed of:
1 twisting duckbill clamp with T-handle (RG3363-4SJ) and 
2.10 m of extra-flexible copper cable 25 mm² cross-section, with  transparent PVC insulation
Approx. Weight: 2.60 kg (5.73 lb)