PERMANENT COVERS

They are made in rigid black thermoplastic and are resistant to ultraviolet rays and electrical tracking and are suitable for hot-stick and rubber glove hot line use.

Covers for Stirrup Connector

| Rated voltage 25 kV (phase/phase) | COB14959-1 For protected distribution line stirrup connectors and clamps. Approx. Weight: 0.95 kg (2.09 lb)

Shunt Connector Cover-Up

| Rated voltage 14.6 kV (phase/phase) | COB13559-1 For wedge tap connectors on protected distribution lines. Rubber glove work only. Approx. Weight: 0.10 kg (0.22 lb)

Transformer Bushing Cover-Up

The bushing cover are used for protection of the transformer terminals on distribution systems, preventing short-circuiting, mainly related to birds and other small animals.

	| Rated voltage 14.6 kV (phase/phase) | COB11721-1 t can be easily installed with specific plastic fasteners, available in one single model for several brands and models of transformers. Approx. Weight: 0.13 kg (0.29 lb)
	| Rated voltage 14.6 kV (phase/phase) | COB18644-1 t can be installed on several sizes of cables. Approx. Weight: 0.11 kg (0.24 lb)
	| Rated voltage 25 kV (phase/phase) | COB24863-1 For cables Ø 25 mm and Ø 15 mm. simple installation by predisposed pins. Approx. Weight: 0.13 kg (0.29 lb)
	| Rated voltage 1 kV (phase/phase) | COB24885-1 It has a staggered perpendicular output for distribution cables up to Ø 21mm, simple installation by predisposed pins. Approx. Weight: 0.17 kg (0.37 lb)
	| Rated voltage 1 kV (phase/phase) | COB24891-1 It has a staggered perpendicular output for distribution cables up to Ø 18mm, simple installation by predisposed pins. Approx. Weight: 0.10 kg (0.22 lb)

Cover for Structure-Mounted Disconnect Base

| Rated voltage 14.6 kV (phase/ground) | COB19874-1 It is designed for protection between the disconnect switch housing and energized parts. Permanent use avoids short circuit caused mainly by the contact of birds and other animals. Approx. Weight: 4.80 kg (10.60 lb)