TEMPORARY FUSE SWITCH
t is designed to maintain protection during interventions on conventional distribution network fuse switches, as a temporary transformer bushing jumper component.
This switch is mounted and removed with a hot stick.
Its lower end bronze pin is for temporary jumper connection. The Ø 32 mm RITZGLAS® pipe with two rubber skirts ensures insulation.
NOTES
- Fuse links are not supplied with the fuse switch and must be purchased by third parties with a maximum capacity of 100 A.
- Opening this switch under a load requires the use of a loadbuster device
- The temporary pivot lever fuse switch allows is designed to close on the opposite side of the fuse holder using a hot stick.
Cat. No. | Description | Voltage Class | Approx. Weight | |
kg | lb | |||
RC600-1895 | Standard | up to 27 kV | 4.10 | 9.04 |
RC600-1944 | Pivot lever | 4.40 | 9.70 |